Home

ICS Header 2

GBE1 Electronic Pump Interface for Gilbarco Highline 111B™

Use the Gilbarco Highline 111B™ electronic pump with any console or card system designed for mechanical pumps!

 

 

With the growing number of electronic pumps on the used pump market, many commercial fueling sites are installing them. Electronic pumps have no moving parts in the display, which makes them last longer at high speed. The GBE1 interface was designed to allow the Highline 111B™ pumps and dispensers to be controlled as a mechanical pump, allowing operation with a wide range of  inexpensive consoles or card systems.

 

 

GBE1

FEATURES

 

  • Highline 111B operates in stand-alone mode. Price programmed with command module.
  • Each GBE1 controls 1 hose of the Highline 111B
  • Dual pumps / dispensers require 2 GBE1 modules
  • Highline 111B still controls pump motor / valves.
  • Totalizer is unaffected by GBE1
  • GBE1 has built-in pulser which will generate 1, 10, or 100 pulses per gallon
  • Compatible with virtually any mechanical pump console or card system

 

 SPECIFICATIONS

Authorize Input
110VAC Nominal, 135VAC Max.
In-Use Output
110VAC Nominal, 135VAC Max.
Pulse Output Ratio
1, 10, or 100 Pulses per Gallon(DIP Switch Selectable)
Pulse Output Type
Contact closure output via. solid state device. Compatible with virtually any console or card system.
Case Size
3.3” x 3.3” x 1.25”
For more information and specifications, see the GBE1 installation instructions

 

  MODEL NUMBERS

MODEL NUMBER
DESCRIPTION
GBE1-A
GBE1 Electronic Interface for Gilbarco Highline 111B™

 


ADDITIONAL GBE1 DOCUMENTATION:

(These files are in PDF Format.)

getacro

 

GBE1 Information Page

GBE1 Installation Instructions