LinkTag Reader for Phoenix Card Systems
|
The ICS LinkTag reader is a module designed specifically to allow the LinkTags to be read by a Phoenix 8000 or Phoenix AFC fuel management system. The LinkTag reader emulates the Phoenix system’s magnetic card reader, so it is automatically compatible with all versions of Phoenix system firmware.
|
LinkTag Reader Front
|
-
SIMPLE TO INSTALL - The LinkTag reader replaces the card reader in a Phoenix system. Simply attach the 4 included screws and plug in the cable.
-
SIMPLE TO OPERATE – Once installed, the LinkTag reader constantly scans for a LinkTag. When the user holds a LinkTag within 2 inches of the reader face, the data is automatically read and transmitted to the card system.
-
SECURE – Each LinkTag reader contains a secret code which is required to communicate with LinkTags. Only LinkTags ordered for use with your system will work.
-
RELIABLE – Since the LinkTag reader has no physical connection with the LinkTags, there are no connectors to wear out or replace. ICS warranty covers the LinkTag reader for 2 years.
|
|
LinkTag Reader Back
|
|
SPECIFICATIONS
|
General
|
LinkTag Reader Dimensions
|
4.0 in. x 3.0 in. x 1.0 in.
|
Comm. range
|
2 inches
|
Weight
|
3.5 oz
|
Data transfer speed
|
100K bits/sec
|
Write cycles
|
Unlimited
|
Temperature range
|
-20C – 50C
|
Read cycles
|
Unlimited
|
|
ADDITIONAL DOCUMENTATION:
(These files are in PDF Format.)
|
| |
